MIMORAD 5G Antenna

Installation of the MIMORAD 5G Antenna is simple. It should be installed outdoors where you have a strong 5G network signal (or 4G network signal if connecting to a 4G router). The twin antenna cables should then be connected to the router. If your 5G router has 4 x antenna connection ports then you can use 2 x MIMORAD antennas and connect to the four SMA ports on the 5G Router. If your 5G router has TS9 connectors then you will need to purchase 2 x TS9 Antenna adapters.

The Fullband MIMORAD 5G Antenna covers all the 2G, 3G, 4G and the latest 5G cellular network frequencies so will work with all the current 4G and 5G routers in the market.

MIMORAD 5G Antenna

Fullband® MIMORAD® is an omni Directional, high performance wide band antenna that has twin connector cables to connect to the MAIN and AUX ports of 4G and 5G routers.

MIMORAD MiMo Antenna Supports 2G / 3G / 4G / 5G Mobile Network Frequencies in the UK

It is a Fullband Antenna which means that it works with all UK 2G, 3G and 4G mobile network frequencies so can be used with all of our 3G and 4G routers that have a MAIN and AUX antenna connection.

It is fully weatherproof so can be positioned outdoors in the optimum position to caputure the best 3G/4G/5G signal and deliver it to the connected device and its vertical beam width and back to front ratio ensure that it will deliver the best MIMO Plus performane at all times.

The Peak Gain of this MiMo antenna is 6dBi and the antenna can be wall or pole mounted.

The MIMORAD 5G Antenna is pre-terminated with 2 x 5m long antenna cables terminated with SMA Male connectors to fit directly to the antenna ports of your 3G or 4G Router. If you need to extend the cable length then remember you will need to purchase two antenna extension cables. Please also remember that if you are using antenna extension cables that your extended cable length will depend upon the signal strength of the mobile network at the antenna location. If your signal strength is excellent then you can extend up to 15m to 20m but if the signal strength at the antenna location is only good or medium then your maximum cable length should be shorted at perhaps just 10m.

Frequency 800-960/1710-2600MHz/3500Mhz (supports NEW 5G Mobile 2700Mhz and 3500Mhz)
Central point 800/1800/2600MHz
VSWR 2.0
Peak Gain 6dBi
F/B radio 8dBi
Polarizatio Type Vertical
Vertical beam width 800-960MHz—40-60°, 1710-2700MHz–14-32° 3500Mhz 10-28°
Rated Power 100w
Input Impedance 50 Ohm

Physical
Connector Type SMA Male x 2
Cable type SSF50 5m long x 2
Operation temperature -40 to +70 celcius
Water proof level IP67
Mounting method U bolt
Dimensions 70mm Diameter x 350mm height
Radome Materal PVC
Weight 1.5Kg

Buy the MIMORAD 2×2 MIMO 5G ANTENNA

5G CPE PRO3

5G CPE Pro 3 – 5G Wi-Fi Router

Key Features

  • 1.8 Gbps Downlink
  • 250 Mbps Uplink
  • 5G/4G Dynamic Spectrum Sharing Supported

Overview

Stay Home, Stay Connected with the 5G CPE PRO3 Router

With the 5G CPE Pro 3, you can set up a whole-home mesh network system, offering seamless Wi-Fi throughout your home. As you walk around the house, the connected device will automatically switch to the strongest signal in the system.

Easy to set up for a variety of scenarios including, home broadband, small and medium business. It is also is convenient when you need to create an impromptu network in areas without traditional broadband.

If you want to watch 4K TV and enjoy high upload speed, then the 5G CPE Pro 3 is perfect. It offers download speeds of up to 1.8 Gbps and upload speeds of 250 Mbps.

There is one SSID for both 2.4GHz and 5GHz, the latter being the priority. 5GHz Wi-Fi offers up to 1201Mbps, while 2.4GHz Wi-Fi gives 574Mbps. Pressing the Optimize button ensures you always have the best Wi-Fi performance.

Dynamic Spectrum Sharing Supported. In different deployment phases of the LTE and NR networks, LNR shared spectrum can be dynamically allocated to the two RATs (minute-level) based on their network load. Only one RAT can use the shared spectrum at a time.

Technical Specification

One-Name Wi-Fi, Seamless Roaming
One-Click Pairing WPS key to enter the mesh
1+5 – supports one CPE and five Wi-Fi routers
Wi-Fi coverage – 500m2
Switching time when travelling among mesh units – <100ms

Auto Sync – once changed Wi-Fi name or password

Game Turbo, Improve Your Gaming Experience Vastly

Near & middle field – >100ms latency reduced

Far field – > 100ms latency reduce

All you need is a 5G SIM card and you can enjoy super fast 5G Internet using the 5G CPE PRO3 Router.